|
|
|
SMIRT DieShop™ 8.07.11.09 Release Notes
|
Area |
Description |
GENERAL
|
Fix a condition where deleting a face could cause SMIRTDieBuild to abort.(#1195) |
GENERAL
|
Improve accuracy of Center Of Diameter function.(#1406) |
GENERAL
|
Correct behavior when child details and the child's parent are both selected for travel, i.e. only travel the child once.(#1439) |
DISPLAY
|
A blinking cursor is shown when user clicks in the travel amount input box.(#1444) |
GENERAL
|
Correct a condition that caused DieShop to abend when loading an Operation, if annotations in the previous operation view were selected.(#1512) |
|
|
|
SMIRT DieShop ™ 8.07.11.09.05 Release Notes
|
Area |
Description |
GENERAL
|
In DiebuildView, a heightmark may now be placed on a non-planar face, if the face has Rough Machining assigned. The heightmark will report the stock allowance specified.(#1593) |
GENERAL
|
Allow more efficient use of memory on 64Bit systems.(#1610) |
|
|
|
SMIRT DieShop ™ 8.07.11.09.06 Release Notes
|
Area |
Description |
GENERAL
|
Revisions made so that note can be opened in 64bit windows OS (vista or windows 7).(#1623) |
GENERAL
|
A segment on a section cut through a solid that has had a color change will be drawn in the correct, current color.(#1627) |
|
|
|
SMIRT DieNC™ 8.07.11.09 Release Notes
|
Area |
Description |
GENERAL
|
NC Manager revised to allow user creation and management of folders for storing NC Objects. Folders may be created, copied, shared, deleted, and renamed. Additionally NC Object information such as tool name, head name etc. may be written to a file or printed directly from the application. (#1351) |
GENERAL
|
Enhancements made to save annotations with an NC Page. Notes, balloons, measurements and ordinate dimensions are now saved along with the NC Page. For drilling, annotations may be stored individual on the collections page (all) and may be stored on a specific page when that page is created or edited.(#1352) |
GENERAL
|
Added commands; “Add Solid to Setup” and “Add Solid to Reference”. Add Solid to Setup command allows addition of a “machine able” solid to an existing NC object. Add Solid to Reference command allows addition of a “non machine able” solid to an existing NC Object; the new solid is for visual reference only.(#1353) |
GENERAL
|
Tool Manager and Page Manager enhanced to support printing. Items of the document are user configurable via; Settings --> List. (#1354) |
GENERAL
|
Enhancements made to add color as an additional search criteria for hole collection.(#1356) |
GENERAL
|
Speed enhancements made to Step Down algorithm to eliminate redundant collision checking.(#1373) |
GENERAL
|
Enhancements made so that the on-screen rotation values are updated immediately when a face is selected or the rotational values are changed.(#1423) |
GENERAL
|
Changes made to profiling routines to properly detect start point of the curve. Also, Z stock option added to Plunge and Step In cutting strategies.(#1434) |
GENERAL
|
Revisions made so that Tool Control Point (center or tip) is taken into account when ball nosed tools are used on an inclined surface. (#1437) |
GENERAL
|
Corrections made to eliminate tapered cuts on straight walls. Previously some straight walls generated a slightly tapered cut due to tolerance issues.(#1438) |
GENERAL
|
Corrections made to remove the space between Program ID letter and user input numeric value. (#1443) |
GENERAL
|
Corrected application errors when a double pick on the same point occurred in the Edit Path --> Trim; Remove Position command.(#1452) |
GENERAL
|
Corrected application errors when “Set Tool Position” command was used while in Add Path mode.(#1453) |
GENERAL
|
User defined tolerance added to Settings --> Hole Filter to account for holes that are not perfectly aligned from top to bottom.(#1454) |
GENERAL
|
Corrected post processor output for canned cycles using G68 plane rotation commands. Previous versions output incorrectly for certain quadrant boundaries.(#1455) |
GENERAL
|
Changes made to “Set Feedrate” command (edit path) so that when an Undo is command is given path positions are not removed. Previous versions would remove some tool path positions.(#1489) |
GENERAL
|
Revised calculation of approach and depth settings for canned cycles when plane reset output (looking through the spindle) is needed. Post processor setting of Plane Reset; Key Value = 4 is required.(#1499) |
GENERAL
|
Corrected head rotation not retaining manually input values. Prior version will accept manual input and then revert back to prior rotation values when animated or posted.(#1504) |
GENERAL
|
Corrected inch/metric conversions on profile dialogs; past versions would convert certain inch inputs into a metric equivalent when in inch mode(#1509) |
GENERAL
|
Corrected errant helical motion during a Mill Diameter path that occurred on certain select situations. (#1541) |
GENERAL
|
Revised hole collision checking method to avoid false collisions.(#1547) |
|
|
|
SMIRT DieNC ™ 8.07.11.09.01 Release Notes
|
Area |
Description |
GENERAL
|
Correct condition where collision checking is inaccurate when multiple solids in NC setup.(#1563) |
|
|
|
SMIRT DieNC ™ 8.07.11.09.02 Release Notes
|
Area |
Description |
GENERAL
|
Corrected false violations that occurred sporadically when using large drills for spot drilling.(#1565) |
|
|
|
SMIRT DieNC ™ 8.07.11.09.04 Release Notes
|
Area |
Description |
GENERAL
|
Fix a crash when rendering NC toolpaths with ATI FireGL V3100 video card.(#1576) |
|
|
|
SMIRT DieNC ™ 8.07.11.09.05 Release Notes
|
Area |
Description |
GENERAL
|
Revised support for “slant” style heads. Prior versions falsely reported some faces as unreachable.(#1581) |
GENERAL
|
Corrected occasions when two features where assigned to the same hole.(#1589) |
GENERAL
|
Revisions made to insure annotation displays properly after view axis is changed.(#1599) |
|
|
|
SMIRT DieNC ™ 8.07.11.09.06 Release Notes
|
Area |
Description |
GENERAL
|
Fixed loss of data when copying from local folder to a shared folder.(#1590) |
GENERAL
|
Added optional stop for collision checking process.(#1620) |
|
|
|
SMIRT NcUtil™ 8.07.11.09 Release Notes
|
| |
|
|
SMIRT NcUtil™ 8.07.11.09.05 Release Notes
|
Area |
Description |
GENERAL
|
Revisions made so that extra blocks are not added to a head when SDS file loading is canceled Corrections made to eliminate renaming of the shade file folder when heads are renamed. (#1236) |
|
|
|
SMIRT ShapeMilling ™ 8.07.11.09 Release Notes
|
Area |
Description |
GENERAL
|
Support material thickness based on the current unit setting.(#1335) |
|
|
|
SMIRT ShapeMilling ™ 8.07.11.09.02 Release Notes
|
Area |
Description |
GENERAL
|
Correct condition where collision checking is inaccurate when multiple solids in NC setup.(#1563) |
GENERAL
|
Corrected false violations that occurred sporadically when using large drills for spot drilling.(#1565) |
|
|
|
SMIRT ShapeMilling ™ 8.07.11.09.04 Release Notes
|
Area |
Description |
GENERAL
|
Fix a crash when rendering NC toolpaths with ATI FireGL V3100 video card.(#1576) |
|
|
|
SMIRT DieBuild™ 8.07.11.09 Release Notes
|
Area |
Description |
GENERAL
|
An attribute is available for Task Formulas for every solid in the Operation that indicate if it is native to the Process, Currently Assembled, or Assembled previously.(#1157) |
GENERAL
|
Floating notes are now positioned in the view on Fit, according to the View / Fit with Annotation view option.(#1325) |
GENERAL
|
A button to "Remap" stocklist components to the DieCost Standard Components table is added to the Component Mapping screen.(#1344) |
GENERAL
|
Better synchronization of NC Objects from a prior rev with the newer rev during DieBuild Import.(#1346) |
GENERAL
|
Task flags no longer jump around when selected.(#1391) |
GENERAL
|
Users may now multiply select Tasks fro Accept Changes or Delete using the Ctl key.(#1397) |
GENERAL
|
Do not recalculate downstream operations when face machining assignment is made to a face, but the machining type is unchanged.(#1420) |
GENERAL
|
Better performance and logging during DieBuild Import.(#1421) |
GENERAL
|
Better synchronization of Faces in Machining Tasks with Faces assigned Machining.(#1435) |
GENERAL
|
Correct an error that sometimes displayed the wrong Height Value when DieBuild Rough stock was considered.(#1451) |
GENERAL
|
Limit the number of lines displayed in the Task Description in Operation view. Dbl click the Task to see full Description text.(#1456) |
GENERAL
|
The "View Face Manager" menu item is now labeled "Machining Face Manager"(#1492) |
GENERAL
|
Users may select a Face group from the Machining Face Manager and RMB to create a Task with the group faces.(#1493) |
GENERAL
|
When prompted to select entitities for a Task, users may pick "Browse Tasks" and select entities of the same type from another Task in the Operation or Process.(#1494) |
GENERAL
|
A button to (re)load the default preference file is now on the DieBuild settings page.(#1497) |
GENERAL
|
Correct an error that caused a file to fail to re-open after it was saved, when angle measurements were in the Operation.(#1516) |
GENERAL
|
The stocklist component description is displayed when browsing for a DieCost standard component to map.(#1525) |
GENERAL
|
The Tree View and Die Info panes are turned off in the Operation DieBuild View.(#1526) |
GENERAL
|
The Drilling face color group setting is removed from the DieBuild settings.(#1529) |
GENERAL
|
A tooltip no longer displays when RMB on the DieBuild command button.(#1530) |
GENERAL
|
Perform a File / Save after Operation Update if Save mode preference is set to Immediately.(#1532) |
GENERAL
|
A scroll bar is available for long lists of tasks and NC objects in the Operation DieBuild view.(#1533) |
GENERAL
|
Tasks appear in the checkoff list in the same order as the Task list.(#1535) |
|
|
|
SMIRT DieBuild™ 8.07.11.09.05 Release Notes
|
Area |
Description |
GENERAL
|
A screen is added that enables mapping new or renamed details in the current model, with details from the imported diebuild plan.(#1159) |
GENERAL
|
additional commands are disabled while a Diebuild model is being saved.(#1580) |
GENERAL
|
Fix a bug that prevented all selected faces being assigned to a task when they were from multiple instances of the same detail.(#1591) |
GENERAL
|
When the task list is collapsed, it will not expand when the view changes.(#1592) |
GENERAL
|
In DiebuildView, a heightmark may now be placed on a non-planar face, if the face has Rough Machining assigned. The heightmark will report the stock allowance specified.(#1593) |
GENERAL
|
A truncated Task Description now ends with "DBL CLICK for MORE" to notify viewer that an expanded view may be displayed.(#1596) |
GENERAL
|
The speed with which an Operation loads, e.g. with Next Opn, is much faster, especially on large models.(#1611) |
|
|
|
SMIRT DbUtil™ 8.07.11.09 Release Notes
|
Area |
Description |
GENERAL
|
Added filters for selecting Die Reports for build by name and date. Add column sorting.(#1463) |
|
|
|
SMIRT DieCost™ 8.07.11.09 Release Notes
|
Area |
Description |
GENERAL
|
Axes in a Die design are now read into DieCost on Load Die, and the Die design Default axis is the DieCost default.(#1457) |
GENERAL
|
compare details' commodity code attribute with the Itemmaster field in std component table for matching.(#1559) |
|
|
|
SMIRT DieCost™ 8.07.11.09.05 Release Notes
|
Area |
Description |
GENERAL
|
After loading an smz file, DieCost will not updates field values with defaults from form, on "matched" standard components.(#1607) |
GENERAL
|
The Update Library Component command will now not disturb the Detail No field in the standard component record.(#1608) |
|
|
|
SMIRT DcUtil™ 8.07.11.09 Release Notes
|
Area |
Description |
GENERAL
|
Add a string function CONTAINS to test if Text A contains Text B.(#1556) |
GENERAL
|
Add a function to return the login Username for formulas.(#1560) |
|
|
|
SMIRT DcUtil™ 8.07.11.09.05 Release Notes
|
Area |
Description |
GENERAL
|
Correct some error messages during syntax checking in formula interface.(#1612) |
|
|
|
SMIRT DieLayout™ 8.07.11.09 Release Notes
|
Area |
Description |
GENERAL
|
Fix condition where Ordinate - Curve Length Between 2 Points - did not create an ordinate(#1457) |
|
|
|
SMIRT DieLayoutView ™ 8.07.11.09 Release Notes
|
| |
|
|
SMIRT CatV4Read ™ 8.07.11.09 Release Notes
|
| |
|
|
SMIRT CatV5Read ™ 8.07.11.09 Release Notes
|
Area |
Description |
GENERAL
|
Implement DTK V60 patch1 to solve crash problem when importing some CATIA V5 R19 designs. (#1501) |
GENERAL
|
Revised the setting of "Process Invisible" Bodies. (#1550) |
GENERAL
|
Corrected processing the combined machining faces with machining tolerance.(#1551) |
GENERAL
|
Implement DTK V60 patch1. |
|
|
|
SMIRT CatV5Read ™ 8.07.11.09.06 Release Notes
|
Area |
Description |
GENERAL
|
Enhancement made to mirror axes as well as the solids during creating the opposite-hand design based on SMIRT RH LH specification document. (#1628) |
GENERAL
|
Revisions made to process some designs with complexe surfaces. (#1629) |
GENERAL
|
Implement DTK V61. |
|
|
|
SMIRT UgRead ™ 8.07.11.09 Release Notes |
Area |
Description |
GENERAL
|
Revised the setting of "Process Invisible" Bodies. (#1550) |
GENERAL
|
Corrected processing the combined machining faces with machining tolerance.(#1551) |
GENERAL
|
Implement DTK V60 patch1. |
|
|
SMIRT UgRead ™ 8.07.11.09.06 Release Notes |
Area |
Description |
GENERAL
|
Implement DTK V61. |
GENERAL
|
Fix a crash when importing a facet solid in a UG file.(#1280) |
|
|
SMIRT CadExp ™ 8.07.11.09 Release Notes |
Area |
Description |
GENERAL
|
SMIRT CatV5Exp retrieves Part, Build, Press info from Catia v5 design.(#1431) |
GENERAL
|
SMIRT CatV5Exp solved a crash when processing a CATPart file.(#1446) |
GENERAL
|
SMIRT CatV5Exp fix a bug of skipping to create shade file when importing a solid with only one color.(#1500) |
GENERAL
|
SMIRT CatV5Exp fix a bug on combining surfaces.(#1508) |
|
|
|
SMIRTInstaller_v8.07.11.09 Release Notes |
| |
|
|
|
