|
|
|
|
|
SMIRT DieShop™ 8.08.04.10 Release Notes
|
Area |
Description |
DISPLAY
|
Fit graphic area to inside of title block without trimmed edge.(#1595) |
GENERAL
|
IChange the way stocklist items with embedded commas are written to csv file, to improve how stocklist loads to excel.(#1655) |
GENERAL
|
Enhancements made to curve offset functions to produce more uniform and continuous curves.(#1743) |
|
|
|
SMIRT DieShop ™8.08.04.10.01 Release Notes
|
Area |
Description |
GENERAL
|
New option in face select, to select same faces color faces that are continuous with the selected face.(#1777) |
GENERAL
|
In stocklist Edit more, RMB on column header to swap the values from one column with all the values in another column.(#1781) |
GENERAL
|
Improve error reporting when failure occurs on Save.(#1791) |
|
|
|
SMIRT DieShop ™ 8.08.04.10.02 Release Notes
|
Area |
Description |
GENERAL
|
A progress bar and cancel option is added to Solid / Ordinate Hole.(#1799) |
GENERAL
|
Correct some cases where dimensions were not reported in the current preference units (english / metric).(#1820) |
GENERAL
|
Fix weight unit display in DSDieShopTool::ComputeVolumn.(#1832) |
GENERAL
|
Fix problem with radio button events being forwarded to the view from property dialogs.(#1849) |
|
|
|
SMIRT DieShop ™ 8.08.04.10.03 Release Notes
|
Area |
Description |
GENERAL
|
Revised tolerance used for determining parallelism between faces for measurement.(#1667) |
GENERAL
|
Corrected problems where hidden annotation was getting selected while measuring between verticals.(#1863) |
|
|
|
SMIRT DieNC™8.08.04.10 Release Notes
|
Area |
Description |
GENERAL
|
Move tool horizontally at retract height to next drill hole. (#1450) |
GENERAL
|
Added Unicode post processor output. Former T/B setting has been changed to A/U for Ansi or Unicode specification.(#1635) |
GENERAL
|
Modifications to animation functions to insure the proper axis orientation is applied.(#1636) |
GENERAL
|
Corrected application errors that occurred when the Section button was pressed during post processor Animation. (#1650) |
GENERAL
|
Corrected application errors that occurred when the Settings button was pressed while adding holes.(#1651) |
GENERAL
|
Added all feedrates to the list of possible display items for Tool, NC and Page managers. See Setup, List. (#1704) |
GENERAL
|
Enhancements made to curve offset functions to produce more uniform and continuous curves.(#1743) |
|
|
|
SMIRT DieNC ™ 8.08.04.10.01 Release Notes
|
Area |
Description |
GENERAL
|
Internal changes made to profile "follow curve" because cut could violate under certain conditions where the end of the curve ended in/near a corner. Previously the ending extension and clearance values could combine to create a violation.(#1780) |
GENERAL
|
Corrected problems with view changing after face selection was canceled.(#1789) |
GENERAL
|
Corrected display problems when “Show Pocket Stock Flag” was turned off.(#1792) |
GENERAL
|
Corrected the occurrence of DieNC trying to create duplicate drill pages when an NC Object was reloaded.(#1795) |
|
|
SMIRT DieNC ™8.08.04.10.03 Release Notes
|
Area |
Description |
GENERAL
|
Revised hole edit menu items so that edit options are not available when no holes exist.(#1824) |
GENERAL
|
Corrected application failure that occurred in some situations when an NC Object was loaded from a sub-folder.(#1865) |
GENERAL
|
Corrected certain instances of length compensation value being duplicated on output line. Previously G43 H66 would be output when the compensation value was entered as 6.(#1867) |
GENERAL
|
Corrected problems with duplicate NC Objects being created when folders were used.(#1869) |
GENERAL
|
Improved face selection / face axis creation by applying better tolerances. Only faces that result in creation of a face axis will trigger head rotations. Previous versions would allow small rotations and not create the corresponding face axis.(#1872) |
GENERAL
|
Option added for post processors to skip M06 output if current tool has been preselected.(#1907) |
|
|
|
|
SMIRT NcUtil™8.08.04.10 Release Notes
|
| |
|
|
SMIRT NcUtil™8.08.04.10.03 Release Notes
|
Area |
Description |
GENERAL
|
Revised color edit boxes so that all individual colors are not active unless the “Mapping By Color” check-box is checked.(#1853) |
|
|
|
SMIRT ShapeMilling ™8.08.04.10 Release Notes
|
| |
|
|
SMIRT DieBuild™8.08.04.10 Release Notes
|
Area |
Description |
GENERAL
|
When a Task is selected and assocoated geometry is highlighted, collapsing the Task list will not deselect the geometry.(#1656) |
GENERAL
|
The smirt COMMODITY CODE atrribute is now displayed on the component mapping screen.(#1705) |
GENERAL
|
Fix a crash that could occur using Task / Modify and there are very many faces already in the Task.(#1714) |
GENERAL
|
The patchsize may now be passed as an argument to the computemachinetime calculation from the DieCost Task formulas.(#1775) |
GENERAL
|
Fix an error that sometimes caused the autoexclude behavior of tasks selecting NcHoles to misfire.(#1778) |
|
|
|
SMIRT DieBuild™8.08.04.10.03 Release Notes
|
Area |
Description |
GENERAL
|
Correct an error performing Update Departments when the department list is written in multi-byte (e.g Chinese) characters.(#1779) |
GENERAL
|
The face select choice, Detail Same Color Continuous, is now available when selecting faces for Tasks.(#1855) |
|
|
|
SMIRT DbUtil™8.08.04.10 Release Notes
|
| |
|
|
SMIRT DieCost™8.08.04.10 Release Notes
|
Area |
Description |
GENERAL
|
When creating/editing Lines of Action, the window and poly select options are now functional.(#1564) |
GENERAL
|
an option is added to Settings / Data Entry to enable or disable combining items with same name and material into the same DieCost record.(#1633) |
GENERAL
|
Formulas using the SURFACEAREA function now compute identically in the spreadsheet and graphics views.(#1641) |
GENERAL
|
Correct a condition where Select 2D / 3D MFA faces command erroneously reports no such faces.(#1642) |
GENERAL
|
When entering Die Layout graphic view on a Die, the Die is now displayed rather than a blank screen.(#1645) |
GENERAL
|
Now may RMB in the graphic view and choose Face or Solid, then pick a face or solid, to locate in Tree and report RGB and area.(#1647) |
GENERAL
|
The 3D Machining time formula now considers faces that match the 3D Color list, whether as an MFA color or by User color.(#1693) |
|
|
|
SMIRT DcUtil™8.08.04.10 Release Notes
|
Area |
Description |
GENERAL
|
an option is added to Settings / Data Entry to enable or disable combining items with same name and material into the same DieCost record.(#1633) |
GENERAL
|
The DC Administrator may create a list named SEACRH ORDER to control which fields in the component library are compared to stocklist fields from the smz file and in what order.(#1664) |
|
|
|
SMIRT DcUtil™ 8.08.04.10.02 Release Notes
|
Area |
Description |
GENERAL
|
An option to search for holes on MFA faces when reading an smz die is added. holes are represented as LOAs and match geometry defined in table of hole definitions.(#1850) |
|
|
|
SMIRT DieLayout™8.08.04.10 Release Notes
|
| |
|
|
SMIRT DieLayoutView ™8.08.04.10 Release Notes
|
| |
|
|
SMIRT CatV4Read ™8.08.04.10 Release Notes
|
| |
|
|
SMIRT CatV5Read ™8.08.04.10 Release Notes
|
Area |
Description |
GENERAL
|
Read Axis assembly file and get axes info before processing opposite-hand design.(#1698) |
GENERAL
|
After mirroring the Axes in opposite-hand design, Axes will be changed back to Right-Hand Axes.(#1744) |
GENERAL
|
Name of the mapping file currently used will be written down into smirt.log regardless it is in registry or temporarily in memory.(#1614) |
GENERAL
|
Reorganize how TYPE classification is mapped.(#1715) |
GENERAL
|
Supports CATIA V5 R7 to R19. |
GENERAL
|
Implement DTK V62. |
|
|
|
SMIRT CatV5Read ™ 8.08.04.10.02 Release Notes |
Area |
Description |
GENERAL
|
Supports CATIA V5 R7 to R19. |
GENERAL
|
Implement DTK V64. |
|
|
|
SMIRT CatV5Read ™ 8.08.04.10.03 Release Notes |
Area |
Description |
GENERAL
|
Corrected application crash when reading certain faces from an assembly.(#1831) |
GENERAL
|
Corrected skipping reading comments which happened in DTK64 .(#1834) |
GENERAL
|
Solved the issue when a default identity Axis cannot be found. (#1906) |
GENERAL
|
Supports CATIA V5 R7 to R19. |
GENERAL
|
Implement DTK V65. |
|
|
SMIRT UgRead ™8.08.04.10 Release Notes
|
Area |
Description |
GENERAL
|
Name of the mapping file currently used will be written down into smirt.log regardless it is in registry or temporarily in memory.(#1614) |
GENERAL
|
Reorganize how TYPE classification is mapped.(#1715) |
GENERAL
|
Fix crash when loading a Ug File.(#1384) |
GENERAL
|
Supports UG v10 to NX7. |
GENERAL
|
Implement DTK V62. |
|
|
SMIRT UgRead ™ 8.08.04.10.01 Release Notes
|
Area |
Description |
GENERAL
|
Add option "Retrieve component Name" on "Map Detail No" tab to retrieve the component name from an UG design.(#1012) |
GENERAL
|
Add "Note" tab in SMIRT UgRead. (#1813) |
GENERAL
|
type is defined by the attribute retrieved from solid level for Ug design.(#1821) |
GENERAL
|
Enable "Combine Solid From Prt" on the tab "Entities" for UgRead.(#1827) |
GENERAL
|
Supports UG v10 to NX7. |
GENERAL
|
Implement DTK V64. |
|
|
|
SMIRT UgRead ™ 8.08.04.10.02 Release Notes |
Area |
Description |
GENERAL
|
Supports UG v10 to NX7. |
GENERAL
|
Implement DTK V64. |
|
|
|
SMIRT UgRead ™ 8.08.04.10.03 Release Notes |
Area |
Description |
GENERAL
|
Corrected problems with Y and Z axis vectors being reversed.(#1812) |
GENERAL
|
Supports UG v10 to NX7.5. |
GENERAL
|
Implement DTK V65. |
|
|
SMIRT VisiRead ™ 8.08.04.10 Release Notes |
Area |
Description |
GENERAL
|
Correct issues during importing WKF file.(#1661) |
|
|
SMIRT CadExp ™ 8.08.04.10 Release Notes |
| |
|
|
SMIRTInstaller_v8.08.04.10 Release Notes |
Area |
Description |
GENERAL
|
Includes Vero license Manager v1.3.4. |
GENERAL
|
Sliently uninstall the selected old SMIRT versions during the installation. |
|
|
| | | |
