Advanced CADCAM Software Solutions For The Manufacturing Industry
SMIRT NC is an add-on module to SMIRT designed to create tool paths for planar faces, profiles, and drilling holes. The "drag & drop" technology is used to create tool paths directly on the solid geometry with no manual entry of coordinate values.
Features at a glance:
- Industry accepted solution
- Short learning times
- Multiple CAD source import
- Simple, intuitive user interface
- Drag & drop toolpath technology
- Automatic hole drilling
- Indexing head management
- Real time collision checking
- Efficient toolpath editing
- Toolpath animation
- Customizable database
The SMIRT advantage. SMIRT NC takes full advantage of all the features within SMIRT. The ability to extract data and information from multiple CAD sources, the simple and intuitive user interface and the sharp, clear graphics. The dimensioning, section cutting and annotation functionalities of SMIRT are also available in the NC programming environment allowing the machinist to easily analyze the work piece. The manufacturing plan created with SMIRT DieBuild is also available to drive the process sequence, without the need for special documentation created by management. All SMIRT products use the same, easy to use graphical interface ensuring no data is lost when communicating between the machining department and other company departments.
User friendly milling in all directions. Milling a planar face with SMIRT NC is very easy; simply select the face to be machined, choose the tool and the mouse cursor is transformed into the cutter, scaled to actual dimensions. The machinist can move the cutter "free-hand" over the surface or choose advanced constraints to better control the milling operation. Special constraints can be activated to follow vertical walls, execute planar profile milling, set the tool path overlap and control the tool motion direction. If an angled face is selected, no additional work is required as indexing heads are managed and the correct milling plane is automatically set.
Powerful milling / editing techniques. Special milling methods are available to machine pockets, slots, hole diameters or entire surfaces. Stock material can be defined on all tool paths in the Z direction and on the side walls. Editing tools can be used to set the step-down height, strategy, define plunge milling parameters, break and erase tool paths. Other editing commands are available to copy, move and mirror entire tool paths or to move or modify single path points.
Profile toolpaths. Create 3D profile toolpaths from the SMIRT data or import your own curves. Eliminate the need for adjusting the hand wheel on the machine for the Z-axis.
Real time collision check. Collision checking (tool, tool-holder and head against the work piece) is performed while creating the tool path on every cutting or rapid movement and the user defined retract strategies can be applied to the linking movements between any toolpath type. If a collision is detected, an alert flag is displayed and the interference is highlighted to allow the user make the relevant changes.
Powerful drilling hole collection. Drilling holes can be collected and classified by SMIRT NC with drilling methods automatically applied from the user defined data base. Hole collection can be performed fully automatically or manually by selecting single holes or faces for retrieval.
Efficient drilling paths. After drilling holes are collected, the tool paths are created efficiently by grouping the drilling operations by tool. All holes drilled with a selected tool are executed regardless of the drilling direction.
Safe drilling paths. The drilling paths created by SMIRT NC are always checked for collision. All drilling operations that generate a collision are moved to a special list. This gives the operator the option to change the tool set-up in order to correctly drill them without collision. Additionally, retract strategies and distances can be defined by the user to improve the machining safety.
Advanced animation. Toolpath simulation is available for both milling and drilling operations. The animation can be controlled using speed parameters along with the ability to perform a step by step display. A consistent link is created with the post processed file so that it is possible to track the graphical position of the tool with the corresponding line in the post processed file.
Database. The user friendly and intuitive SMIRT NcUtil is provided together with SMIRT NC to allow users to graphically define and manage the data base for tooling, tool holders, drilling methods, machines and machining heads.